SUPERLIFT K823B 6 inch Lift Kit – 2006-2007 Dodge Ram 2500 and 3500 4WD – 5.9L Cummins Diesel Engine – with Bilstein Shocks Superlift

SUPERLIFT K823B 6 inch Lift Kit – 2006-2007 Dodge Ram 2500 and 3500 4WD – 5.9L Cummins Diesel Engine – with Bilstein Shocks

Superlift’s complete coil spring lift kit for the 2006-2007 Dodge Ram 2500/3500 4wd – 5.9L diesel engin,; providing 6” lift height.

• Coil springs are pre-set to minimize settling
• Brackets constructed from .25″ thick plate steel
• Track bar relocation bracket prevents stud bind and steering wheel kick
• Pitman arm relieves drag link angle to prevent bump steer / wandering
• Heavy-duty replacement upper and lower links maintain desired caster angle
• New front, and relocated rear, compression travel stops prevent suspension over-compression
• New anti-sway bar drop brackets prevents bar pre- load
• Superide SS Bilstein shocks included
• Limited Lifetime Warranty
• Satisfaction Guarantee

The coil sprung, solid axle Ram HD will always be a favorite of the Superlift Nation, and for good reason. The suspension platform is “lift friendly”, the drivetrain durable, and the Cummins diesel provides more than adequate torque for large rubber.

Over the years, Superlift has established a reputation as the “go to” source for Ram HD suspension. How did we earn this? Our ideal engine-specific coil spring rates and shock valving have something to do with it. As does the superb steering mannerisms that are a result of ideal caster settings, and correct track bar/pitman arm phasing. Properly addressing things that generally go unaddressed by others, yet matter, like suspension compression travel control. It adds up. Let us show you just how satisfying your lifted HD experience can be.

The 6″ lift begins with new engine-specific pre-set coil springs. A dropped pitman arm for steering correction works in concert with our track bar relocation bracket. New upper and lower front axle-to-frame link arms restore factory alignment specifications. Specially designed, suspension compression travel bump-stops are also provided. Lift blocks raise the rear 4″to negate the factory nose-down stance.

Shocks: Bilstein Shocks

IMPORTANT DISCLAIMER: The provided tire/wheel fitments are approximate. Actual dimensions of a given tire size can vary considerably from one brand to another. Manufacturers’ wheel offset and backspacing measurement points are not always consistent. Backspacing greatly impacts tire-to-fender clearance when turning. Wheel width and backspacing influence whether the tires protrude past the fenders, and to what extent. Considering these important factors, we recommend that you fit-check your tire/wheel selection prior to purchasing.

Installation Notes:
• Installation time: 7 hours
• Difficulty level: 3 of 5

Additional Info:Also fits Ram 1500, 2500, 3500 Mega Cab.

NOTE: If equipped with a two-piece driveshaft, also order carrier bearing drop bracket, part number 4668.

DOWNLOAD installation guide