SUPERLIFT K632 4 inch Lift Kit – 2000-2004 Ford F-250 and F-350 Super Duty 4WD – Diesel and V-10 – with Superide Shocks Superlift

SUPERLIFT K632 4 inch Lift Kit – 2000-2004 Ford F-250 and F-350 Super Duty 4WD – Diesel and V-10 – with Superide Shocks

Superlift’s complete front Superide leaf spring lift kit for the 2000-2004 Ford F-250/F-350 4wd V-10 and diesel engine, providing 4” lift height.

• Springs incorporate military-wrapped spring eyes and anti-friction pads between leafs.
• Track bar relocation bracket prevents steering wheel “kick”.
• New front anti-sway bar hardware maintain factory bar geometry.
• Functional front compression travel stops prevent over-compression and provide a more progressive spring rate; factory rear travel-stops are relocated.
• Rear lift via 3″ blocks.
• Front and rear Superlift Superide shocks included.
• Limited Lifetime Warranty.
• 100% Satisfaction Guarantee.

Note: This lift kit is packaged with rear blocks and u-bolts that are configured for the Ford F-250/F-350 pickups with the factory 1 7/8″ blocks without top mount overloads. If your vehicle is equipped with the factory 3.71″ block or top mounted overloads, a longer rear u-bolt will be required and is available from us. Please refer to the option’s list or call our technical support line at 800-749-0688 for additional details.

Rear u-bolts fit vehicles with and without a top-mounted overload leaf. Those without overloads will have approx. 2″ of excess U-bolt length (that can be trimmed). Or for shorter U-bolts, refer to block chart and replace listed block kit with the non-overload application.

Rear lift based on vehicles with 2.5″ tall factory. If vehicle equipped with 3.5″ tall factory block expect slight rear to front rake.

Shocks: Superide Shocks

IMPORTANT DISCLAIMER: The provided tire/wheel fitments are approximate. Actual dimensions of a given tire size can vary considerably from one brand to another. Manufacturers’ wheel offset and backspacing measurement points are not always consistent. Backspacing greatly impacts tire-to-fender clearance when turning. Wheel width and backspacing influence whether the tires protrude past the fenders, and to what extent. Considering these important factors, we recommend that you fit-check your tire/wheel selection prior to purchasing.

Installation Notes:

• Installation time: 6 hours
• Difficulty level: 3 of 5

Additional InfoRear u-bolts fit vehicles with and without a top-mounted overload leaf. Those without overloads will have approx. 2″ of excess U-bolt length (that can be trimmed). Or for shorter U-bolts, refer to block chart and replace listed block kit with the non-overload application.

Rear lift based on vehicles with 2.5″ tall factory. If vehicle equipped with 3.5″ tall factory block expect slight rear to front rake.