Kryptonite KRCLP11 SS Series Center Link Tie Rod Package, 2011-2020 6.6L Duramax LML L5P Kryptonite

KRCLP11 Kryptonite SS Series Center Link Tie Rod Package.
Factory Taper Size.
This insanely strong center link has been engineered to maintain all factory alignment specs and steering geometry.
Fits 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020 6.6L GM Duramax LML L5P

Factory Taper Size

This insanely strong Center Link has been engineered to maintain all factory alignment specs and steering geometry. This steering system is modeled after the Center Link on the H1 Military Hummer, this is a much stronger design when compared to what’s offered from factory on all non Hummer GM HD Trucks. Can be used with GM or aftermarket Idler/Pitman arms. Will work with Cognito PISK support system.

Note: If installing Kryptonite SS Series centerlink on a leveled or lifted truck you may need to install longer sway bar end links depending on how high the torsion bars have been adjusted. We recommend the Kryptonite HD sway bar end links. This kit will only work on trucks that keep the center link in the factory position. If your truck has been lifted make sure the lift kit you have is a spindle style kit not a control arm drop. This steering system is modeled after the Center Link on the H1 Military Hummer, this is a much stronger design when compared to what’s offered from factory on all non Hummer GM HD Trucks.

KIT INCLUDES:

KRYPTONITE SS CENTER LINK AND TIE ROD PACKAGE

1144 Stress Proof Carbon steel

4140-4130 chromoly steel

Tensile Strength115,000 psi (Min.)85,000–110,000 psi

Yield Strength100,000 psi (Min.)70,000–85,000 psi

(Kryptonite No Fine Print Lifetime warranty)-Kryptonite steering and suspension components are warrantied for life to their original purchaser. This warranty is against any manufacturer defects, premature wear or breakage. Race it, jump it, off road it, sled pull it, lift it, level it, lower it, I think you get it? We don’t care. If you can break it we will replace it.

All Kryptonite tie rods are pre-greased with Chevron ultra duty EP2 (Extreme Pressure) grease they should be serviced with this grease at each oil change. Your Kryptonite products must be purchased from an authorized dealer.